BMW introduced a new valvet ronic, single turbo version of its direct-injection engine for the later F-Chassis models beginning in 2016 and carried over to the G-chassis models. The Active Autowerke B58 downpipe for the M340i and M440i helps unleash some of the potential that is restricted by the OEM downpipe.
Turbochargers are powered by spent exhaust gases created during the combustion process. The quicker these gases are evacuated, the better. Unfortunately, the factory down pipe in the B58 is quite restrictive, which results in slower exhaust gases and slower turbo spool.
The Active Autowerke F-Chassis B58 Signature down pipe utilizes 4.5 diameter stainless steel piping in order to provide more power, quicker spool, and extreme durability. It then tapers down to 3.5" where we've incorporated a stainless flex joint and then down to 80mm to meet the OEM exhaust system. We never drop the diameter less than the stock diameter of 80mm.
This variant includes a 4.5" high flow GESI catalytic converter that will NOT produce a CEL!
The GESiu00ae G-Sport Ultra High Output Catalytic Converter features full 304 stainless steel construction, including the substrate. GESi UHO-Series Catalytic Converters are EPA registered and compliant in 49 states and fully OBD2 compliant, perfect for use on 1996 and newer vehicles. GESi proprietary precious metal loading technology ensures greatly reduced emissions, eliminating most "Check Engine Lights". These high flow catalytic converters outperform stock converters and provide a reliable solution to the most common catalytic converter problems.
The GESi UHO-Series Catalytic Converters are rated for engines putting out between 500 and 850 horsepower while maintaining a high flow capacity. The reduced back-pressure from this high flow catalytic converter will allow you to maximize your engines horsepower without the harmful emissions. Say goodbye to Check Engine Lights and failed emissions tests!
Please Note: These catalytic converters are not legal for use on vehicles registered in the state of California as a result of California Vehicle Code Section 27156 and 38391.
NOTE: Federal law prohibits the tampering of an emissions control device. Mobile Source Enforcement Memorandum 1A, allows for aftermarket parts to be used in the repair or replacement of emissions control systems, provided the emissions aren't adversely affected. There is no mention or reference to cell density or converter volume dimension. The GESI catalytic converter will produce emissions that will meet the standards set by the EPA, not CARB.
FEATURES:
NO CEL when using this downpipe
GESI EPA registered high flow and fully OBD2 compliant
Casted upper stainless steel V-Band for precise fitment
4.50" diameter piping allows for maximum power output
Quicker turbo spool
Rated for 500 to 850 hp applications
Withstands up to 1500 F
Can reach operational efficiency within 9 seconds of startup
Easily bolts-on no cutting or welding required
Durable construction from TIG welded 304 stainless steel
Precise fitment
Ultra high flow 400 cell per square inch catalyst
EPA compliant for use on OBD2 vehicles (1996 and newer) except in California
304 stainless steel substrate is furnace braised to the mantle for outstanding durability
GESi proprietary precious metal loading technology ensures greatly reduced emissions
Ideal for Forced Induction Applications with no loss of HP
Both passengers and drivers are safe from harmful emissions and noise
Covered by 5 Year / 50,000 Mile Warranty (on catalytic converter)
Made in Miami, Florida
CALIFORNIA WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov
This part fits the following vehicles
Make |
Model |
Submodel |
Engine |
Drive |
BMW |
2 Series G42 Coupe (2022+) |
M240i xDrive |
B58 3.0L |
BMW |
3 Series G20 (2019+) |
M340i |
B58 3.0L |
BMW |
3 Series G20 (2019+) |
M340i xDrive |
B58 3.0L |
BMW |
4 Series G22/G23/G26 (2021+) |
M440i xDrive Gran Coupe |
B58 3.0L |
BMW |
4 Series G22/G23/G26 (2021+) |
M440i xDrive |
B58 3.0L |
BMW introduced a new valvet ronic, single turbo version of its direct-injection engine for the later F-Chassis models beginning in 2016 and carried over to the G-chassis models. The Active Autowerke B58 downpipe for the M340i and M440i helps unleash some of the potential that is restricted by the OEM downpipe.Turbochargers are powered by spent exhaust gases created during the combustion process. The quicker these gases are evacuated, the better. Unfortunately, the factory down pipe in the B58 is quite restrictive, which results in slower exhaust gases and slower turbo spool.The Active Autowerke F-Chassis B58 Signature down pipe utilizes 4.5 diameter stainless steel piping in order to provide more power, quicker spool, and extreme durability. It then tapers down to 3.5" where we've incorporated a stainless flex joint and then down to 80mm to meet the OEM exhaust system. We never drop the diameter less than the stock diameter of 80mm.This variant includes a 4.5" high flow GESI catalytic converter that will NOT produce a CEL!The GESiu00ae G-Sport Ultra High Output Catalytic Converter features full 304 stainless steel construction, including the substrate. GESi UHO-Series Catalytic Converters are EPA registered and compliant in 49 states and fully OBD2 compliant, perfect for use on 1996 and newer vehicles. GESi proprietary precious metal loading technology ensures greatly reduced emissions, eliminating most "Check Engine Lights". These high flow catalytic converters outperform stock converters and provide a reliable solution to the most common catalytic converter problems.The GESi UHO-Series Catalytic Converters are rated for engines putting out between 500 and 850 horsepower while maintaining a high flow capacity. The reduced back-pressure from this high flow catalytic converter will allow you to maximize your engines horsepower without the harmful emissions. Say goodbye to Check Engine Lights and failed emissions tests!Please Note: These catalytic converters are not legal for use on vehicles registered in the state of California as a result of California Vehicle Code Section 27156 and 38391.NOTE: Federal law prohibits the tampering of an emissions control device. Mobile Source Enforcement Memorandum 1A, allows for aftermarket parts to be used in the repair or replacement of emissions control systems, provided the emissions aren't adversely affected. There is no mention or reference to cell density or converter volume dimension. The GESI catalytic converter will produce emissions that will meet the standards set by the EPA, not CARB.FEATURES:NO CEL when using this downpipeGESI EPA registered high flow and fully OBD2 compliantCasted upper stainless steel V-Band for precise fitment4.50" diameter piping allows for maximum power outputQuicker turbo spoolRated for 500 to 850 hp applicationsWithstands up to 1500 FCan reach operational efficiency within 9 seconds of startupEasily bolts-on no cutting or welding requiredDurable construction from TIG welded 304 stainless steelPrecise fitmentUltra high flow 400 cell per square inch catalystEPA compliant for use on OBD2 vehicles (1996 and newer) except in California304 stainless steel substrate is furnace braised to the mantle for outstanding durabilityGESi proprietary precious metal loading technology ensures greatly reduced emissionsIdeal for Forced Induction Applications with no loss of HPBoth passengers and drivers are safe from harmful emissions and noiseCovered by 5 Year / 50,000 Mile Warranty (on catalytic converter)Made in Miami, FloridaBMW introduced a new valvet ronic, single turbo version of its direct-injection engine for the later F-Chassis models beginning in 2016 and carried over to the